Quantcast
Channel: Reprap Forum - Controllers
Viewing all articles
Browse latest Browse all 10211

Re: Please tell me I didn't burn out my Rambo Z-axis driver...

$
0
0
There should be no problem with plugging in the board without motors attached. Of course there also should be no problem with plugging it in with motors attached if it's all set up right. If it's a Ramps style board (rather than a Rambo) Make sure the motor driver boards are not plugged in backwards. They will fry regardless of motors if the are in wrong.

Viewing all articles
Browse latest Browse all 10211

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>