Hi,
in RADDS-Shield v1.1 the reset pin are installed.
100 Units v .1.1 have been ordered and 02.2014 as to distribute.
100 RADDS v1.0 this week are stocked here as PCB and SMD components.
This I give to hobbyists for 15 euros a piece from (for itself solder).
Correct (v1.1) is
LED green 50 mcd KING BRIGHT
LED yellow 150mcd KING BRIGHT
RADDS v1.0 has no reset pin and SMT LEDs have false Candela values (luminosity too bright).
When hardware reset, the LEDs also have the error that they flicker.
If the recovery stalls that have 100 kOhm.
RADDS has v1.1:
R1, R4, R7, R10, R13, R16 resistor 33 kohm, 1% WELWYN WCR0805-33KFI
# #
RADDS v1.0 works.
RADDS v1.1 in my opinion is error-free.
# #
Should I enter an article www.max3dshop.de (RADDS v1.0-yourself soldering for 15 € + shipping) in my Mega Store :-) ?
[max3dshop.de]
# #
Submitted, status ...
have Fun
Angelo
in RADDS-Shield v1.1 the reset pin are installed.
100 Units v .1.1 have been ordered and 02.2014 as to distribute.
100 RADDS v1.0 this week are stocked here as PCB and SMD components.
This I give to hobbyists for 15 euros a piece from (for itself solder).
Correct (v1.1) is
LED green 50 mcd KING BRIGHT
LED yellow 150mcd KING BRIGHT
RADDS v1.0 has no reset pin and SMT LEDs have false Candela values (luminosity too bright).
When hardware reset, the LEDs also have the error that they flicker.
If the recovery stalls that have 100 kOhm.
RADDS has v1.1:
R1, R4, R7, R10, R13, R16 resistor 33 kohm, 1% WELWYN WCR0805-33KFI
# #
RADDS v1.0 works.
RADDS v1.1 in my opinion is error-free.
# #
Should I enter an article www.max3dshop.de (RADDS v1.0-yourself soldering for 15 € + shipping) in my Mega Store :-) ?
[max3dshop.de]
# #
Submitted, status ...
have Fun
Angelo