Hi aranciam,
on Friday will arive the next Charge (100 RADDS v1.0 + 5 RADDS v1.1)
The 5 Radds v1.1 are all preordered, sorry for that.
We Think, that the Quality and the new/optimized Feature are ok, and Then we give Order for 100 RADDS v1.1 (middle/end of February 2014).
If the Community accept the RADDS v1.1 and we see, that they would like to have it an their like it,
we can ordered 1000 number of units (then verry, verry lower Price).
In the meantime can i ask which firmware wiil work with it?
Repetier version 0.91 Rev 4 (look in Topic)
[www.repetier.com]
..it will come with the firmware already uploaded?
Sorry I dont understad your Question.
You have to configure Repetier-Firmware, than you Download all the Files on your PC, start your Arduino-IDE Software, connect via USB your Arduino-DUE (udoo etc..),
and upload your Firmware on your DUE. Then plug the RADDS-Shield on the DUE, connect your components
(Stepperdriver, Steppermotor-Cable, Headbed, Hotend, FAN, Endstops, opt. Reset-Pin , LCD-Click-Encoder-SD, Servo, Sound etc..)
and Test your configuration.
Can i download it now?
The Repetier-Firmware works with the RADDS-Shield.
You can Download it here:
[github.com]
Or you can Configure Repetier-Firmware with the GUI and then you can Download your personal Configuration:
[www.repetier.com]
[attachment 25219 Repetier-Download.JPG]
I hope, that I have give the Right Answer for you.
If not, please contact me.
Have Fun
Angelo
on Friday will arive the next Charge (100 RADDS v1.0 + 5 RADDS v1.1)
The 5 Radds v1.1 are all preordered, sorry for that.
We Think, that the Quality and the new/optimized Feature are ok, and Then we give Order for 100 RADDS v1.1 (middle/end of February 2014).
If the Community accept the RADDS v1.1 and we see, that they would like to have it an their like it,
we can ordered 1000 number of units (then verry, verry lower Price).
In the meantime can i ask which firmware wiil work with it?
Repetier version 0.91 Rev 4 (look in Topic)
[www.repetier.com]
..it will come with the firmware already uploaded?
Sorry I dont understad your Question.
You have to configure Repetier-Firmware, than you Download all the Files on your PC, start your Arduino-IDE Software, connect via USB your Arduino-DUE (udoo etc..),
and upload your Firmware on your DUE. Then plug the RADDS-Shield on the DUE, connect your components
(Stepperdriver, Steppermotor-Cable, Headbed, Hotend, FAN, Endstops, opt. Reset-Pin , LCD-Click-Encoder-SD, Servo, Sound etc..)
and Test your configuration.
Can i download it now?
The Repetier-Firmware works with the RADDS-Shield.
You can Download it here:
[github.com]
Or you can Configure Repetier-Firmware with the GUI and then you can Download your personal Configuration:
[www.repetier.com]
[attachment 25219 Repetier-Download.JPG]
I hope, that I have give the Right Answer for you.
If not, please contact me.
Have Fun
Angelo
