I'm far enough along in my design I've started a thread for the CRAMPS board (BeagleBone Cape version of RAMPS).
I would appreciate it if anyone here is willing to do a design review of the schematic, which is mostly complete. I still have some I/O pins to assign, which will be done based on the PCB layout which is in progress, but everything except the top sheet is now complete (pending any errors found).
Thanks again for the great design work on the RAMPS-FD!
I would appreciate it if anyone here is willing to do a design review of the schematic, which is mostly complete. I still have some I/O pins to assign, which will be done based on the PCB layout which is in progress, but everything except the top sheet is now complete (pending any errors found).
Thanks again for the great design work on the RAMPS-FD!