It's not gonna work. I tried every single way of applying it and In repetier it says that the nozzle is at 220 degrees, but the hotend won't do anything. I can barely get the filament flowing through at 260ºC.
I don't know why.
Now experimenting with #6
With Thermo #1 I can print on 260ºC
With Thermo #6 I can print on 250ºC
The other ones in the pre-made file don't come close to that, not even melting filament at 260ºC and the tables I make myself I also have to set the printing temp well over 260ºC.
I hope ErikZalm can help me, I will try to send him a note or something.
I don't know why.
Now experimenting with #6
// 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
With Thermo #1 I can print on 260ºC
With Thermo #6 I can print on 250ºC
The other ones in the pre-made file don't come close to that, not even melting filament at 260ºC and the tables I make myself I also have to set the printing temp well over 260ºC.
I hope ErikZalm can help me, I will try to send him a note or something.