Hi, with these values I still needed to put the values very high... So I reverted to using #6 and having to input the printing temp as 250ºC now.
I have discovered that 41*OVERSAMPLER (or 41*16=656) is the value that should be around 220ºC for my thermistor. Because thats the temperature where the ABS has a nice melting temperature. So I should get myself a table that has that value around 220/225ºC.
I have discovered that 41*OVERSAMPLER (or 41*16=656) is the value that should be around 220ºC for my thermistor. Because thats the temperature where the ABS has a nice melting temperature. So I should get myself a table that has that value around 220/225ºC.