Hmmmm..my only advice against RAMPS is how it deals with its MOSFETS...it has a flaw in design that makes them enter in resonance with the hotbed and, unless they are quite powerful, they tend to fry:
I have one myself and got it burnt in the first day...actually is just a matter of luck whether your provider has assembled the correct type of MOSFET or not. So, just for precaution, I would warn you to get some with the specifications of any of the above links, just in case.
However, for a first printer, an even better solution is to avoid ABS and focus in PLA. As PLA doesn't require of a hotbed you will be safely printing for a long time.
Happy printing! :)
I have one myself and got it burnt in the first day...actually is just a matter of luck whether your provider has assembled the correct type of MOSFET or not. So, just for precaution, I would warn you to get some with the specifications of any of the above links, just in case.
However, for a first printer, an even better solution is to avoid ABS and focus in PLA. As PLA doesn't require of a hotbed you will be safely printing for a long time.
Happy printing! :)