Re: RUMBA random disconnects

In fact, I did some more testing,

I did try what you said (never rule out a idea ;-) ). But since i'm using a laptop, there is no loopback ground possible. (at lease I havent found one)

But I did find something worth mentioning, When changing the 5V selector to USB POWER, the problem goes away. I can do a much G28 and G29 as I want.. it wont reset. But, as soon as I but it back in its original position, I can't do one sequence without it reseting,

So, for now, I thing its a faulty step down regulator problem.

I'll continu my tests and see.

Thanks for the lead :-)

J-F