Quantcast
Channel: Reprap Forum - Controllers
Viewing all articles
Browse latest Browse all 10211

Stepper motors not moving

$
0
0
Recently I assembled my Prusa Air 2, but I noticed the hotend and the heatedbed were working fine but none of the stepper motors were working. I tried running ramps test software with a step stick but the motors still wont move. I tested the voltage from the potentiometer to the ground pin and get around 0.4v, I turned the potentiometer both ways yet the motor won't move. I have also confirmed the motors are working with my adafruit motor shield


Viewing all articles
Browse latest Browse all 10211

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>