I tried that first. I have the Gen7 options listed and chosen and still get
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: verification error, first mismatch at byte 0x1f800
0x8f != 0xff
avrdude: verification error; content mismatch
The friend I got the USBasp from said he had managed to burn a bootloader with it, so does that mean my board is more broken then I assumed?
Update:
Despite the errors I managed something that looked like an upload of the GEN7 bootloader and fusesetting. Now arduiona can upload a sketch but the upload timeouts after 3-4 minutes.
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: verification error, first mismatch at byte 0x1f800
0x8f != 0xff
avrdude: verification error; content mismatch
The friend I got the USBasp from said he had managed to burn a bootloader with it, so does that mean my board is more broken then I assumed?
Update:
Despite the errors I managed something that looked like an upload of the GEN7 bootloader and fusesetting. Now arduiona can upload a sketch but the upload timeouts after 3-4 minutes.