Pretty much none of the vendors stick to any specific colour code for the wiring in their motors, and some vendors will even change the colour code on their motors from batch to batch.
You will want to test your motors to see which coils are which, and wire them as appropriate. As long as you get both coils hooked up to the necessary outputs, their orientation doesn't matter too much, as you can change the direction in software.
I would test your motors (with a voltmeter) and see which wires are connected to a coil.
See [reprap.org] for more info.
You will want to test your motors to see which coils are which, and wire them as appropriate. As long as you get both coils hooked up to the necessary outputs, their orientation doesn't matter too much, as you can change the direction in software.
I would test your motors (with a voltmeter) and see which wires are connected to a coil.
See [reprap.org] for more info.
