Quantcast
Channel: Reprap Forum - Controllers
Viewing all articles
Browse latest Browse all 10211

Re: 24v switch question (7 switch, two power supplies)

$
0
0
Depends entirely on your firmware. There you define which pin does what. Easiest move is probably to just replace the pin definition for the heated bed.

When operating 24 V make sure you have the 2k2 resistor soldered in (red-red-red), else the indicator LED will blow (but the remaining switch will continue to work).

Viewing all articles
Browse latest Browse all 10211

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>