100x123mm is very large, for example the sanguino has 100x50 mm, and is shouldn`t be larger i think otherwhise there may be some space troubles with small printers.
The Duet itself has also only support for 1 Extruder at stock, for this its not very expensive, thats true, but with the expansion board its also costs 200 euro here.
i would say 80 Euro (incl.) should be the upper limit for a single board solution that has all the features that 95% of the users need.
for sure things like Webserver more than 2 extuders, thermocouple and all that stuff is nice, but most people just don`t use that features.
From the feature set it should be about enough what RAMPs 1.4 can do, just with stronger mosfet to drive heatbed`s better.
i`m also a heavy user with printing, have four printers and developing lot`s of stuff, but i don`t like the webinterface, you have to ensure to have a network or change your networksettings when you are printing at other places where you don`t have network and so on, i`m just using printrun which has all the basic features and is not overloaded and when dual printing a other USB host software, even on my windows tablet ^^
especiall when i`m checking out printerspeed settings (jerk/acc/steppings) there is no other way than to use a display.
Chri
The Duet itself has also only support for 1 Extruder at stock, for this its not very expensive, thats true, but with the expansion board its also costs 200 euro here.
i would say 80 Euro (incl.) should be the upper limit for a single board solution that has all the features that 95% of the users need.
for sure things like Webserver more than 2 extuders, thermocouple and all that stuff is nice, but most people just don`t use that features.
From the feature set it should be about enough what RAMPs 1.4 can do, just with stronger mosfet to drive heatbed`s better.
i`m also a heavy user with printing, have four printers and developing lot`s of stuff, but i don`t like the webinterface, you have to ensure to have a network or change your networksettings when you are printing at other places where you don`t have network and so on, i`m just using printrun which has all the basic features and is not overloaded and when dual printing a other USB host software, even on my windows tablet ^^
especiall when i`m checking out printerspeed settings (jerk/acc/steppings) there is no other way than to use a display.
Chri