I have more clues on the puzzle...
Like I reported above, the green LED comes on for either the HE0 or FAN0 port when I enable them via Repetier. But unlike the heated bed LED, which is a solid green when enabled, these go bright green for a second, then out, then fade in to about half strength. Both LEDs have the same behavior.
Thanks,
Rob
Like I reported above, the green LED comes on for either the HE0 or FAN0 port when I enable them via Repetier. But unlike the heated bed LED, which is a solid green when enabled, these go bright green for a second, then out, then fade in to about half strength. Both LEDs have the same behavior.
Thanks,
Rob