Quantcast
Channel: Reprap Forum - Controllers
Viewing all articles
Browse latest Browse all 10211

Re: Heatbed Heater Options

$
0
0
Ok interesting development. I had a look at the original Felix 1.5 instruction manual, cos that used an ATX supply too. In that one, the Green wire in the ATX was soldered to one of the Ground wires. The Green one in that PSU is labled "PS/On" on the actual circuit board for the power supply. Now when I looked at the circuit board for this one, what do i spot? A green wire with PS/On where it hits the PCB. My instinct is to do the exact same with this one. Green > Ground so it's on once it's plugged in. Makes sense, right?


Viewing all articles
Browse latest Browse all 10211

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>