Hello,
Thanks for your opinions.
The Alligator is distinguished by the quality, due to power filters and other peripherals is very robust to interference and don't stops printing. With the piggy you can get to 7 engines, and 5 analogue channels. The analog channels are filtered. Also being on layer 4, the PCB serves as the heat sink and therefore does not require additional components.
The steps and the motor current is selected from firmware, this allows the delta have identical currents wineskin to make the operation of calibration easy.
With the addition of up to 7 Piggy engines and 5 analog channels.
The high-current connectors avoid that melt, then safety.
So it's not like the Duet, the Duet is the Duet and the Alligator is the Alligator .....
For Ethernet and other peripherals, the firmware is ready and will be released at the end of the campaign.
Thank You
3DArtists Team
Thanks for your opinions.
The Alligator is distinguished by the quality, due to power filters and other peripherals is very robust to interference and don't stops printing. With the piggy you can get to 7 engines, and 5 analogue channels. The analog channels are filtered. Also being on layer 4, the PCB serves as the heat sink and therefore does not require additional components.
The steps and the motor current is selected from firmware, this allows the delta have identical currents wineskin to make the operation of calibration easy.
With the addition of up to 7 Piggy engines and 5 analog channels.
The high-current connectors avoid that melt, then safety.
So it's not like the Duet, the Duet is the Duet and the Alligator is the Alligator .....
For Ethernet and other peripherals, the firmware is ready and will be released at the end of the campaign.
Thank You
3DArtists Team