Is not quite correct, for example if you use a delta machine, a classic 8-bit can not make the change of coordinates in real time and although if you print forms with high mesh 8 bits fails.
So I understand very well the potential of the microcontroller.
Also as there is the Ethernet with the TCP stack, the possibility of an LCD color graphic and other...
In reality Repetier adapts well to be ported on a 32-bit architetture, unlike Marlin.
But users prefer to use what you already use to be able to make changes, so it is right to support the community. The idea is to extend the printing experience and not to remain closed.
Thanks Again
3DArtists Team
So I understand very well the potential of the microcontroller.
Also as there is the Ethernet with the TCP stack, the possibility of an LCD color graphic and other...
In reality Repetier adapts well to be ported on a 32-bit architetture, unlike Marlin.
But users prefer to use what you already use to be able to make changes, so it is right to support the community. The idea is to extend the printing experience and not to remain closed.
Thanks Again
3DArtists Team