I have not used my Sanguish as much as I would have wanted to but here's what I did have issues with (sorry I always believe Beta is the time to mention that more than whats good - good there is but take the complaints as positive criticism meant in a very positive way )
Current setting: I asked Bryan to preset the current to my standard config which works quite well, no issues. But I wanted to test it on something beefier as well, which I have yet to do because
1. I haven't had to time to study datasheet, calculate new resistors, etc
and 2 having to desolder, solder new ones, etc for switching current is not ideal
Silkscreen - mentioned above - but having to dig out a cheatsheet was also a turn off
Otherwise my rest has been updated above (layout etc)
Nice board by the way. Version 3 will be great (; The one with onboard USB and either pots or lever dipswitches for current
Current setting: I asked Bryan to preset the current to my standard config which works quite well, no issues. But I wanted to test it on something beefier as well, which I have yet to do because
1. I haven't had to time to study datasheet, calculate new resistors, etc
and 2 having to desolder, solder new ones, etc for switching current is not ideal
Silkscreen - mentioned above - but having to dig out a cheatsheet was also a turn off
Otherwise my rest has been updated above (layout etc)
Nice board by the way. Version 3 will be great (; The one with onboard USB and either pots or lever dipswitches for current