Thank you for the answer. I will read it very carefully and if I'll have more questions I hope you could answer me again.
Also this are my stepper data:
Weight:0.4kg
2 Phase
Skidproof Shafts
Step Angle:1.8±5% degree/step
Voltage: 12V
Current: 1.2A/phase
Resistance:10.0±10% Ω/phase
Inductance:20±20%mH/phase
Lead style:AWG26 UL1007
Comes with 4-Lead Wire
Holding torque:48N.cm Min
Detent torque:2.6N.cm Max
Insulation cllass:B
Rotor torque:68g.cm2
Here I have a new question. How much time would be a reasonable time to reach the working current value?
Also this are my stepper data:
Weight:0.4kg
2 Phase
Skidproof Shafts
Step Angle:1.8±5% degree/step
Voltage: 12V
Current: 1.2A/phase
Resistance:10.0±10% Ω/phase
Inductance:20±20%mH/phase
Lead style:AWG26 UL1007
Comes with 4-Lead Wire
Holding torque:48N.cm Min
Detent torque:2.6N.cm Max
Insulation cllass:B
Rotor torque:68g.cm2
Here I have a new question. How much time would be a reasonable time to reach the working current value?