Quantcast
Viewing all articles
Browse latest Browse all 10211

Re: printrboard revb wont connect

Standard drill is to pull everything off of the board, power it from USB and see if you can talk to it. If not try just 12V and USB. If still no joy .... bad board. You could look for missing parts and craters in parts. If you have a scope you could start looking at signals.

Viewing all articles
Browse latest Browse all 10211

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>