... I now have two comercial XY-galvo-heads with the electronics and will try to reactivate them or use them with my own drivers, so interested in this development too :D
One of the setups is from an +20 years old 3DSystems SLA-printer - here I have all the 'guts' and the controller (but the HeCD-laser), but no information regarding the electronics ... have to solve it on my own or find some internal data sheets ...
The other one is an engraving/marking system from 2001 with a (maybe nonfunctional) 150Watt NdYAG-laser and a XY-scanner head with 250x250mm working area -- here I hope to get the information and maybe the controlling PC and software ...
One of the setups is from an +20 years old 3DSystems SLA-printer - here I have all the 'guts' and the controller (but the HeCD-laser), but no information regarding the electronics ... have to solve it on my own or find some internal data sheets ...
The other one is an engraving/marking system from 2001 with a (maybe nonfunctional) 150Watt NdYAG-laser and a XY-scanner head with 250x250mm working area -- here I hope to get the information and maybe the controlling PC and software ...