Thanks mate :)
It's ABS that I've used. I was going to buy some PLA but my friend gave me a reel of ABS that he had spare so I thought I'd use that even though it's meant to be more difficult to get good results with ABS.
Thanks for the link - I'll have a look, and I need to look for the layer height setting and adjust that too potentially.
It could be the extruder steps actually. I measured all the Axes movement was correct before, but didn't test the calibration of the extruder I must confess!
What trouble are you having yourself? I hope you get it sorted out ok.(tu)
It's ABS that I've used. I was going to buy some PLA but my friend gave me a reel of ABS that he had spare so I thought I'd use that even though it's meant to be more difficult to get good results with ABS.
Thanks for the link - I'll have a look, and I need to look for the layer height setting and adjust that too potentially.
It could be the extruder steps actually. I measured all the Axes movement was correct before, but didn't test the calibration of the extruder I must confess!
What trouble are you having yourself? I hope you get it sorted out ok.(tu)