In order to take the power supply off of standby you must connect the blue ( power standby) and the red 5v line. I used a switch on this line. Its just like a lot of computer power supplies, except there power standby is usually green I believe. So in order to take the power supply off of standby connect the 5v wire to the power sense or power standby. Power sense and power standby are the same blue wire. Some people call it by different names. I have some LED's also connected to the 5v line with no issues. I personally will use a wall wart to power my logic circuit boards. Its just a personal preference. If you have any other questions feel free to ask I am always available to help a fellow builder.
↧