Re: T-Bone: A radically new Reprap Board
Is there a firmware to work with this? Also, on the firmware side is it actually possible to upload customized current % level tables?
View ArticleRe: T-Bone: A radically new Reprap Board
Yes and no (but yes). Yes there will be firmware for this board. It consist of several parts: - The 3d Printing is done in Python and the motion controller control in C on an Arduino. A bit more...
View ArticleRe: My little ARM board
OK. Then maybe it is best to leave out the protection on your board so you can use them as you like? Do you have any comments regarding the design? I might add that it is a 4-layer board but I only...
View ArticleRe: T-Bone: A radically new Reprap Board
I have explained the configuration possibilities a bit more in the blog [www.tbone.cc]
View ArticleRe: T-Bone: A radically new Reprap Board
I think the trinamic features are quite awesome, and implementing that would be an awesome development. Not only for 3D printing but for other milling applications as well. I think its a great step in...
View ArticleRe: T-Bone: A radically new Reprap Board
QuoteDustI think your marketing division needs to be shot! The shape makes it dumb and unusable.+1. The size is ridiculous. Production costs could be decreased and/or yield increased with a more...
View ArticleRe: T-Bone: A radically new Reprap Board
Quotecdru QuoteDustI think your marketing division needs to be shot! The shape makes it dumb and unusable.+1. The size is ridiculous. Production costs could be decreased and/or yield increased with a...
View ArticleRe: My little ARM board
@Mallgan.O Sorry but I don't know what to say about the design, I'm not an EE. I don't know how the presence of protection components would affect me. For testing, I'm planning to hook it up with...
View ArticleRe: Servos to Rambo 1.2 d
Perfect !!! Work on my Rambo 1.1b. I add only a picture if it can help somebody. Thanks a lot for your post.
View ArticleRe: Power supply shuts down when heated bed MK2a is connected.
Hmm... I removed the PCB heatbed and it still reads the same resistance as before; I also inspected the mounting holes visually (they're close but not obviously problematic) and by testing with a...
View ArticleRe: Power supply shuts down when heated bed MK2a is connected.
My Mk2A is similar to yours on the front (led side) but on the back of yours there are another pair of elongated tracks where you have soldered your wires to. Are those connections not connected...
View ArticleRe: T-Bone: A radically new Reprap Board
I'm surprised that nobody pointed out the obvious global marketing problem caused because some major cultures around the world don't eat beef, and at least one big player worships cows as gods which...
View ArticleRambO Mosfets
Hello, I am reverse engineering the RambO board and making it myself. But one thing that continues to confuse me is why there are two types of mosfets being used?? My only guess is to save space of...
View ArticleRe: RambO Mosfets
They used to use the same FET for all outputs with 1.0. Should be no problems doing that. I think apart from cost, he changed it so he could fit 2 small FETs in place of a larger single FET, and add a...
View ArticleRe: RambO Mosfets
ok thanks, good to know it was as i had guessed, just for space and a little cost.
View ArticleRe: T-Bone: A radically new Reprap Board
"Don't have a cow man" - Bart Simpson (had to be said)
View ArticleRe: Power supply shuts down when heated bed MK2a is connected.
waitaki: That did the trick! I did what you suggested and the resistance went up by about 1 Ohm, and now my bed seems to be working perfectly! Thanks for all the help!
View Article