Pololu reprap.me driver no reference voltage
Hello, I bought a pololu driver from reprap.me on ebay. I had a problem with soldering one of the connector legs that goes to the sanguino (the VDD leg) where some solder went and attached itself to a...
View ArticleA new development option
Hold the presses. I didn't notice if anyone else has mentioned it, but there is now a product called "Embedded Pi" available at the element14 site. It's especially for this purpose. It has the header...
View ArticleAluminium clad resistors vs pcb heated bed
Hello, im building a 3d printer and im having a hard time to choose between a normal pcb heatbed or a heated bed with aluminium clad resistors... Can you guys give me some opinions and recommendations...
View ArticleRe: Aluminium clad resistors vs pcb heated bed
Resistors heat faster because their resistance is constant. They need mounting on an aluminium plate which gives good heat spread but is heavy and it is expensive to get a plate that is guaranteed...
View ArticleRe: A new development option
Thinkyhead Wrote: ------------------------------------------------------- > Hold the presses. I didn't notice if anyone else > has mentioned it, but there is now a product > called "Embedded...
View ArticleRe: Aluminium clad resistors vs pcb heated bed
Or... Use a silicon heating pad like used in the Heated WolfBed.
View ArticleRe: Gen6 Heatbed Daughter Board - Easily achevable!!
Nice. I'll wait impatiently the final board!
View ArticleClik here to view.
Re: Gen6 Heatbed Daughter Board
@BRSS... It's nice that someones interested, I thought I was the only one with a Gen6 board on this forum. lol. I've only been into 3D printing for about 2 months and feel I may be a little behind the...
View ArticleRe: Gen6 Heatbed Daughter Board
slymike Wrote: ------------------------------------------------------- > It's nice that someones interested, I thought I > was the only one with a Gen6 board on this forum. > lol. No, you're...
View ArticleBuy Quality Fake Passports,ID cards,Drivers license and other documents.
Hello, Getting a fake and real passport , ID or driving license or any other document is simple. I can make you both real and fake documents However, the real documents are more expensive than the...
View ArticleRe: A new development option
This still doesn't solve the problem. You're replacing a $6 part with a $39 part and a $35 part. $6 < ($39 + $35). That is the problem with Raspberry Pi-based electronics. As long as you're trying...
View ArticleRe: A new development option
While I'm going the Beaglebone Black route, my end objective is a stand-alone 3D Printer system. The $45 BBB with a WiFi connection, the Printer Cape, and a 4.3" TFT LCD touch display, will fit in the...
View Articletwitching stepper motors
so i was dry printing with my prusa mendel i3 today (sanguino 1.3a) and my y axis stepper motor got hot so i turned the entire printer off when it cooled down and i powered on again all the stepper...
View ArticleHow to repair broken potis on g3d a4988 drivers
Hi, I broke two stepper drivers in one week (http://gadgets3d.com/index.php?route=product/product&product_id=72). I was really gentle on turning the potis with my ceramic screwdriver. Are they...
View ArticleRe: strange thermistor behaviour and shut down in the middle of a print (GEN7)
thanks both of you, I have a radial thermistor but im on vacations currently so I have left the fix for when I come back. I will post my results then for the sake of further reference by other people :)
View ArticleHeatbed shuts down - sometimes
I've just completed the construction of a Mendelmax from a kit. I've got just about everything working now except for one thing. If I try to heat the heatbed up to 110 C it shuts off before ever...
View ArticleIssues with Arduino and multiple printers
I have two printers both using Arduino Mega 2560 boards, one has a board about a year older than the other. When i try and connect to the newer board my laptop doesnt recognize it. If i install the...
View ArticleRe: Firmware to drive X-Y galvanometer
hI, IM LOOKING FOR MAKING A 3D UV RESIN PRINTER TOO.. i SEE TAHT THE OPTION WITH GALVOS PERHAPS WILL BE BETTER AND FASTER THAT THE CARTESIAN SYSTEMS? BUT WHAT ABOUT THE SCANED AREA, IM THINKING ON A...
View ArticleRe: Firmware to drive X-Y galvanometer
Hi Bob. Please, excuse me, anythin wrong last nigth with the shift key or on my mind!!!!!:S I resend the post adequately. Hi pleople, as i tell you on my other :(.....im looking for start my sla...
View Article